TEK-1 SIL
Additional curing duplicating silicone with low hardness Shore A and high tear resistance, without any colour pigments. Especially developed for the TEK-1 system.
- High reproduction of duplicated model
- Models are easy to remove thru the low Shore A hardness
- Suitable for all silicone dispensers
Our safety data sheets and application instructions in PDF format:
Material safety data sheet 261001 TEK-1 SIL – component A
| Density g/cm³ | 1 : 1 |
| Hardness VH 10 | 40 seconds |
| Proof stress (MPa) | > 6 min. |
| Modulus of elasticity (Mpa) | 30 – 45 min. |
| Elongation at rupture % | 3.0 MPa |
| Tensile strength MPa | 360 % |
| Melting range (°C) | 5.0 N/mm |
| Casting temperature (°C) | 12 – 15 |
| Composition-%: | |
| Other: |
| 261001 | TEK-1 SIL – Silikon – (2 x 1 kg) |
| 261011 | TEK-1 SIL – Silikon – (2 x 6 kg für DA 2000) |
| 261010 | TEK-1 SIL – Silikon – (2 x 6 kg für w. Spender) |
| 261020 | TEK-1 SIL – Silikon – (2 x 25 kg) |
