Adisil® rapid 1 : 1
A rapid-curing, addition-curing duplicating silicone, developed especially for express jobs using adhesive crepe sleeves or flaks. Remove Adisil® rapid from the duplicating mould after just 10 minutes.
- removable from the duplicatingmould after 10 minutes
- suitable for use with dispensingunits
- tear/tear growth resistant
- low-viscosity
Our safety data sheets and application instructions in PDF format:
Material safety data sheet 101231 Adisil rapid – component A
Material safety data sheet 101231 Adisil rapid – component B
| Mixing ratio: | 1 : 1 |
| Mixing under vacuum | 40 sec |
| Working time at 23 °C | 3 – 4 min |
| Curing time at 23 °C | 10 min |
| Tear resistance (DIN 53504) | ca. 2,2 N/mm² |
| Elongation at tear (DIN 53504) | ca. 310 % |
| Tear growt resistance (ASTMD 624 B) | > 6,5 N/mm² |
| Shore A hardness at 60 min. | >24 |
| Colour | yellow |
| 101231 | Adisil rapid 1 : 1 (2 x 1,0 kg) |
| 101244 | Adisil rapid 1 : 1 (2 x 6,0 kg) |
| 101234 | Adisil rapid 1 : 1 (2 x 6,0 kg) |
| 101237 | Adisil rapid 1 : 1 (2 x 25,0 kg) |
