Silicone sleeves, model form
For economic, direct investing with the model-shaped base plate.
- Vertical groove structure on the inside of the ring increases the surface area.
- Setting expansion is not affected, ensuring an optimum fit of the casting.
- Use of a silicon sleeve ensures a more uniform heat uptake and controlled cooling of the moud.
- The whole span of the pattern can be placed at the same distance from the mould wall, optimising the fit of the casting.
Model-shaped silicone sleeve:
| 1 x Size 0 | Ø 70×55 mm |
| 1 x Size 1 | Ø 75×60 mm |
| 1 x Size 2 | Ø 80×65 mm |
| 1 x Size 3 | Ø 90×75 mm |
Our safety data sheets and application instructions in PDF format:
| Colour | |
| Water-Powder-ratio | |
| Processing time in minutes | |
| Setting time in minutes | |
| Setting expansion % | |
| Compressive strength, after 1 hour(MPa) | |
| Compressive strength, dry (MPa) |
| 102617 | Silicone sleeves (size 0) |
| 102603 | Silicone sleeves (size 1) |
| 102604 | Silicone sleeves (size 2) |
| 102605 | Silicone sleeves (size 3) |
