SilaMill hybrid

Five simultaneously operating axes
The second axis of rotation (B axis) with a rotation range of up to ± 30 degrees enables the milling of undercuts, thereby opening up many new processing options.

Wide range of materials and indications
Processing of wax, plastics, zirconium oxide and composites through to NEM materials based on cobalt chromium, titanium and glass ceramics. fur Crowns and bridges (also fully anatomical), inlays, onlays, abutments, telescopic crowns, model plates, model casts, bite splints, implant bars, Veneers, table tops, etc.

Powerful and high-precision synchronous spindle
With 4-fold hybrid ceramic ball bearings and 300 watts of nominal power under continuous load.

Optional wet-grinding module
The machines are prepared for connecting the wet grinding module. There are already liquid nozzles attached to the spindle to ensure this Cool the tool while grinding. You can also grind glass ceramics in this way.

Powerful Robustness
The machine bed made of a solid cast aluminum body ensures maximum stability and low-vibration operation.

Milling without prior knowledge
Very easy to operate using the included DentalCAM CAM software with processing strategies specifically tailored to grinding – none previous knowledge of milling or grinding is required.

Sophisticated protective mechanisms
Protection of the danger area through automatic safety locking of the front flap during processing. Protects the mechanics from dust and chips as well as reduced wear and maintenance costs thanks to the integrated work area sealing air concept.

Our safety data sheets and application instructions in PDF format:

Colour
Water-Powder-ratio
Processing time in minutes
Setting time in minutes
Setting expansion %
Compressive strength, after 1 hour(MPa)
Compressive strength, dry (MPa)
REF 249501