Combined offer DUNAFORM PLUS Pressure Former

Our pressure moulding device DUNAFORM PLUS is a new generation device.

  • Whether used in lab or clinic –it’s a sophisticated unit.
  • Menu-driven and user-friendly handling
  • Large and clearly laid out display
  • Permanently programmed sheet parameters plus 10 freely programmable memory spaces
  • Time information is given visually and acoustically
  • No pre-heating necessary, the short-wave infrared radiator will set to the desired temperature immediately
  • Heating of the thermoforming foil takes place on the side facing the model
  • Foil reception for two diameters: 120 mm + 125 mm. Thereby almost all commercially available foils can be applied.

The device is delivered including a foil trial set and 2 kg of granules.

Technical Data:
Electric supply: 230 V/50 Hz
Electrical power: 850 W
Weight: approx. 8,5 kg
Width: 350 mm
Depth: 300 mm
Height: 190 mm

 

Our safety data sheets and application instructions in PDF format:

  Application instructions Combined offer DUNAFORM PLUS Pressure Former

Colour
Water-Powder-ratio
Processing time in minutes
Setting time in minutes
Setting expansion %
Compressive strength, after 1 hour(MPa)
Compressive strength, dry (MPa)
REF 278023