SilaMill 4 classic-cutters for non-precious alloys on CoCr basis
Milling cutters for SilaMill 4, 32 mm length
REF 249300 – double-toothed radius cutter Ø blade: 0,60 mm, length blade: 1,2 mm
REF 249301 – double-toothed radius cutter Ø blade: 1,00 mm, length blade: 3,0 mm
REF 249302 – double-toothed radius cutter Ø blade: 2,00 mm, length blade: 4,0 mm
REF 249303 – double-toothed torus cutter Ø blade: 1,20 mm, length blade: 3,0 mm
Our safety data sheets and application instructions in PDF format:
| Colour | |
| Water-Powder-ratio | |
| Processing time in minutes | |
| Setting time in minutes | |
| Setting expansion % | |
| Compressive strength, after 1 hour(MPa) | |
| Compressive strength, dry (MPa) |
| 249300 | M060-R2-32 – Double-toothed radius cutter Ø blade: 0.60 mm, length blade: 1.2 mm |
| 249301 | M100-R2-32 – Double-toothed radius cutter Ø blade: 1.00 mm, length blade: 3.0 mm |
| 249303 | M120-T2-32 – Double-toothed torus cutter Ø blade: 1.20 mm, length blade: 3.0 mm |
| 249304 | M200-R4-32 – Four-toothed radius cutter Ø blade: 2.0 mm, length blade: 4.0 mm |
SilaMill 5 milling cutters for for non-precious alloys on CoCr basis
