CAM-Stone N
Special stone for CAD-CAM systems (e.g. Cerec)
CAM-Stone N has been developed for opto-electronic scanning. It prevents interfering reflections in the defined wavelengths. By using CAM-Stone N the coating of the gypsum model is not necessary. The short setting time allows a fast chairside treatment.
Recommendation: For opto-electronic scanning (e.g. Cerec-System), crown and bridge models, master casts with precious and non-precious alloys.
Colour: ivory
Packagings:
5,0 kg bag
4 x 5,0 kg bag
10,0 kg bucket
25,0 kg carton
25,0 kg paper bag
Our safety data sheets and application instructions in PDF format:
| Colour | ivory |
| Water-Powder-ratio | 20 : 100 |
| Processing time in minutes | 4 |
| Setting time in minutes | 7 – 9 |
| Setting expansion % | 0,06 |
| Compressive strength, after 1 hour(MPa) | 60 |
| Compressive strength, dry (MPa) | 90 |
| 205120 | CAM-Stone N – ivory – 5,0 kg bag |
| 205123 | CAM-Stone N – ivory – 10,0 kg bucket |
| 205121 | CAM-Stone N – ivory – 4 x 5,0 kg bag |
| 205124 | CAM-Stone N – ivory – 25,0 kg paper bag |
| 205129 | CAM-Stone N – ivory – 25,0 kg carton |
