Wax BioStar w. Shoulder
A milling wax disc especially adjusted to the dental CAD/CAM technique. Thereby crowns and bridges can be virtually formed, milled and finally casted the conventional way. The wax is excellently machinable and burns without residue. This results in smooth casted surfaces. These optimized features of the wax give way to even very delicate forms excluding shrinkage or distortion of the milled object. The wax – stable in volume – permits absolutely exact margin finishings and fits. Up to 30 units can be milled out of one disc.
Our safety data sheets and application instructions in PDF format:
Colour | |
Water-Powder-ratio | |
Processing time in minutes | |
Setting time in minutes | |
Setting expansion % | |
Compressive strength, after 1 hour(MPa) | |
Compressive strength, dry (MPa) |
250032 | Wax BioStar w. Shoulder Ø 98.5 mm, H 14 mm |
250033 | Wax BioStar w. Shoulder Ø 98.5 mm, H 16 mm |
250030 | Wax BioStar w. Shoulder Ø 98.5 mm, H 18 mm |
250031 | Wax BioStar w. Shoulder Ø 98.5 mm, H 25 mm |