»   TEK-1

TEK-1 SIL

Additional curing duplicating silicone with low hardness Shore A and high tear resistance, without any colour pigments. Especially developed for the TEK-1 system.

  • High reproduction of duplicated model
  • Models are easy to remove thru the low Shore A hardness
  • Suitable for all silicone dispensers
Density g/cm³ 1 : 1
Hardness VH 10 40 seconds
Proof stress (MPa) > 6 min.
Modulus of elasticity (Mpa) 30 – 45 min.
Elongation at rupture % 3.0 MPa
Tensile strength MPa 360 %
Melting range (°C) 5.0 N/mm
Casting temperature (°C) 12 – 15
Composition-%: 
Other:
261001 TEK-1 SIL – Silikon – (2 x 1 kg)
261011 TEK-1 SIL – Silikon – (2 x 6 kg für DA 2000)
261010 TEK-1 SIL – Silikon – (2 x 6 kg für w. Spender)
261020 TEK-1 SIL – Silikon – (2 x 25 kg)